BVMS3-Software BVMS3-SOFTWARE 

BVMS3-SOFTWARE


Brinell-Vickers-Meas-System (BVMS)

By being connected to the BVMS-SOFTWARE with digital calliper, all universal hardness testers whose evaluation of Vickers- / Brinell hardness is carried out via a ground glass, can be upgraded.

DESCRIPTION BVMS "PRO"


By retrofitting, you can reduce the amount of time necessary and are also able to design the print-out of a representative and extensive test protocol. Additionally, there is the possibility to save all your measuring data. The documentation is based on the same principle as the VMS.

The relevant parameters such as test procedure, test load, enlargement or ball diameter (Brinell) are selected via the software. The software displays the degree of hardness, the selected procedure, a revaluation in compliance with DIN EN ISO 18625 in Rockwell e.g., as well as the diagonals.

BVMS *Pro* at a glance:
– Direct presentation of measuring results in the display
  Own design and printout of a representative test protocol for the documentation
– Storage available to save all data
– Data transfer to networks (LAN, WAN, etc.)
– Automatic revaluation according to DIN EN ISO 18265 in Rockwell HRA/HRC, Brinell and tensile strength Tab. A.1 B.2, B.3, B.4, C.2, D.2, F.2
– Fatigue-free operation
– Simple and fast handling
– Data export
– Data output as pdf (e.g. for sending e-mails)
– Unlimited number of the most varied templates
– Presentation of progressive graphs of hardness (6 pieces) in tables and graphics
– Statistics (e.g. to establish the mean value formation)
– and much more

EXTENT OF DELIVERY


  • BVMS-Software
  • Tablet PC / PC-System
  • Mitutoyo Digital Calliper
  • Data Cable
  • Support Arm
  • Dongle
  • Operating Instructions

DESCRIPTION BVMS "LIGHT"


The relevant parameters such as test procedure, test load, enlargement or ball diameter (Brinell) are selected via the software. The software displays the degree of hardness, the selected procedure, a revaluation in compliance with DIN EN ISO 18625 in Rockwell e.g., as well as the diagonals.

BVMS „Light“ at a glance:
– Direct presentation of measuring results in the display
– Automatic revaluation according to DIN EN ISO 18265 in Rockwell HRA/HRC, Brinell and tensile strength Tab. A.1 B.2, B.3, B.4, C.2, D.2, F.2
– Fatigue-free operation
– Simple and fast handling
– and much more

EXTENT OF DELIVERY


  • BVMS-Software
  • Tablet PC / PC-System
  • Mitutoyo Digital Calliper
  • Data Cable
  • Support Arm
  • Dongle
  • Operating Instructions

Interested in learning more?